|
|
|
Toilet Installation
Remove the rag from the toilet's waste pipe, and set a wax ring down around its base. This
is what will seal the toilet and keep water and gasses from leaking out. Position the wax ring
around the waste pipe evenly and lift the toilet up above it. Set the toilet down on the wax ring
at a slight angle and twist the toilet sharply forward into place. Sit on the bowl of the toilet and
rock from side to side and from front to back to settle the toilet onto the ring. At the side of your
toilet, near the floor, you'll find the water intake. Remove the cap from the intake on the toilet,
and screw the hose coming from the valve in the wall into the toilet. Turn on the water and allow
it to fill the tank.
Flush the toilet to check for leaks, and you have completed your toilet installation. Set the tank
cover in place and enjoy your new toilet. |
|